Before you start, ensure you have the following remote:
Step 1: Place the images you wish to display on a USB with no content. The name of the image files must not begin with numbers.
Step 2: Turn on the display then insert the USB.
Step 3: Navigate to the MagicInfo menu by pressing the exit button and then the home button.
Step 4: Press the right arrow button and then enter to open the schedule menu.
Step 5: Press enter again to open the channel 1 menu.
Step 6: Press enter again to open a file selection menu. The images on the USB should be displayed in this menu. Using the arrow button navigate to each image and select it using the enter button. Selected images should have an arrow appear in their check box. Once your images are selected, move down to done on the screen and press the enter button.
Step 7: The selected images should appear in a row in the channel 1 screen. Set the time each image should appear for before switching to the next in the box below that image.
Step 8: Set the time period the sequence of images should play over. Select all day to have the sequence playing so long as the display is on. Move down to save and press the enter button.
Step 9: Navigate to the MagicInfo menu by pressing the exit button and then the home button. Press the enter button to enter the player menu.
Step 10: Move to the local channel box and hit the enter button. The content should now display on the screen.
- Images on the USB can be updated by replacing them with images of the same name.