NEC Single Screen Setup


The following steps will need to be carried out on all Single screen NEC installs.


Upon first boot, if prompted:

The LAN POWER needs to be set to 'ON' (Figure 1)

The POWER SAVE needs to be set to 'DISABLE' (Figure 2)




After completing these steps, navigate the screens menu and locate the SCHEDULE tab

Within the schedule tab head to:

OFF TIMER and set it to 'OFF' (Figure 3)

SCHEDULE SETTINGS is blank //no options selected (Figure 4)

DATE & TIME is set to appropriate (Figure 5)

DAYLIGHT SAVING is set to appropriate






Navigate to the tab MULTI-DSP and set under ID CONTROL

Auto ID to YES, and wait for the changes to take place. (Figure 7)




Navigate to the PROTECT tab

POWER SAVE is set to DISABLE (Figure 8)




Navigate to EXTERNAL CONTROL tab

LAN POWER is set to ON (Figure 9)




Navigate to PRO 1 ADVANCED tab

OVERSCAN is set to OFF (Figure 10)




These are the steps required to setup the NEC screens for maximum throughput.